UNIVERSAL CROWSFOOT FLYWHEEL PULLER #985-125K
Works with ANY flywheel having 3 threaded holes for pullers around the center flywheel nut hole.
Most Mercury motors have the center hole internally threaded, and use this #201 puller instead.
(illustrated using old 40 HP Johnson flywheel above)
This is the same kit sold by Bombardier at much higher price
NEVER disassemble or try to pull ANY outboard
flywheel with a gear puller! The 40 HP OMC flywheel in the picture
above looks solid, but it (and most all outboard flywheels) acts
as the motors' harmonic balancer. You will cause it to fail from
imbalance or just plain break the flexplate. The puller shown above
will allow proper removal of all flywheels with 3 bolts near the
crankshaft. Includes crankshaft protector. You may have to get the
proper bolts for your application locally depnding on motor (included bolts fit most outboards). Be sure to get grade 8,
the ones with 6 radial lines on the head.
Can also be used to pull many prop bearing carriers
using long bolts.
plus $8.75 postage and handling.
A PROFESSIONAL QUALITY TOOL, NOT
TO BE CONFUSED WITH CHEAP IMITATIONS