| |
POWER TRIM MOTORS
| SUZUKI TRIM MOTORS |
| APPLICATION/DESCRIPTION |
PART # |
PRICE |
SELECT |
PT 650NM 
Fits Suzuki
V4 & V6 1986-90
Repl. 38100-92E00-OED,
38100-87D10-0ED, 01T
3-wire Connection
3-bolt Flange, Female Hex Shaft
O-ring Included |
PT650NM |
$199.00
|
|
PT 651NM 
Fits Suzuki
V4 & V6 1990-03
DT90 91-97, DT100 91-00,
DT150 91-03, DT175 91-92,
DT200 91-00, DT225 91-03
Repl. 38100-92E00-OED,
38100-87D10-0ED,
38100-87E20-0ED,
2-wire Connection
3-bolt Flange
3 Couplers, O-ring Included |
PT651NM |
$230.00 |
|
PT 112N-NP
MOTOR AND VALVE BODY

Will Fit Early Suzuki Trims Using
Similar-looking Prestolite Motors.
MUST BE INSTALLED AS A UNIT, THE ORIGINAL PARTS ARE METRIC, THIS IS AN SAE UNIT. The 3 Mounting Holes on the bracket are the same.
|
PT112N-NP
3 WIRE CONNECTION |
$513.00
|
|
PT 116N-NP MOTOR & VALVE BODY
Fits LATE MODEL SUZUKI with SIDE MOUNT TRIM/TILT
2- wire Connection
YOU WILL
RECEIVE NEW 2-WIRE MOTOR
IN PLACE OF
OLD 3-WIRE SETUP
O-ring Included
THIS IMAGE IS OF THE API REPLACEMENT.
SEE A FULL
COLOR PICTURE
NO CHEAP PLASTIC HERE! |
PT116N-NP
|
$490.00
|
|
PT 653NM
MOTOR ONLY

FITS Many DF60-300 Motors 2001-UP
2-wire, 4-Bolt Mount
REPLACES SUZUKI PART NUMBERS:
38100-92J02, -92J10, -93J01, -93J02, 96J00
|
PT653NM
2 WIRE CONNECTION |
$180.00
|
|
PT 655NM
MOTOR ONLY

FITS SUZUKI DF40 & DF50 thru 2000
2-wire, 4-Bolt Mount
REPLACES 38100-87J-OEP
|
PT655NM
2 WIRE CONNECTION |
$210.00
|
|
PT 656NM
MOTOR ONLY

FITS SUZUKI 4 Stroke 40 & 50 HP
2-wire, 4-Bolt Mount w/Male Slot Shaft
REPLACES 38100-87J11, 38100-87J20
RE-USE ROUND WHITE PLUG FROM ORIGINAL
|
PT656NM
2 WIRE CONNECTION |
$280.00
|
|
PT 657NM
MOTOR ONLY

FITS MANY SUZUKI 40-140 HP LATE 1990's
2-wire, 2-Bolt Mount
REPLACES 38100-99E01-OEP, -OED
|
PT657NM
2 WIRE CONNECTION |
$230.00
|
|
353771801M 
Fits Some Early Suzuki
and Some Early Nissan-Tohatsu
Brand New, No Longer Made by Suzuki
|
353771801M |
$395.00 |
|
Please review our Warranty, Returns & Refunds policies before you place an order.
DISCLAIMER
The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.
Site best viewed at 1024 x 768 resolution or higher with Firefox 1.5-up, Netscape 6, or IE 5 or higher
© 1999-2008 MasterTech Marine
Revised 5-7-08
|