Mastertech logo  Used parts link

Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!

 

A Fun Old Porcelain Sign and Ancient Tools

Sign Reads "Wanted: Good Woman Must Be Able To Clean, Cook, Sew,  Dig Worms, and Clean Fish.  Must Have Boat and Motor. Please Send Picture of Boat and Motor.

 

Meet the MasterTech!
(click picture)

Bill the Master Tech

 

If your Mfgr. says:

That motor's 7 years old!!
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Part's at central warehouse, you'll get it next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

Baloney!!

Contact
the Mastertech!

 

 


,

 
view shopping cart
In Your Cart:
 
 
 
To Top


EVINRUDE-JOHNSON OUTBOARD POWERHEAD KITS

PARTS PACKAGES FOR REBUILDING POWERHEADS

These kits contain all the parts you will commonly need to complete the overhaul of your outboard's powerhead. If the determination has been made that you need to rebuild, we have the necessary items! And the nice part is, you will pay less for the kit than you would for the individual parts, as you save us time in ordering. So you will have all the goodies you need to do the job right.

For motors not listed, and motors under 20 HP contact me directly for the specific application. It is likely I can provide the components you need. Feel free to call about your motor or purchasing any components of these kits. 


UNLIKE MANY OF OUR COMPETITORS, OUR rebuild kits include ALL of the following items, as required, unless noted:

  • PISTONS/ RINGS/ WRISTPINS/ RETAINERS.
  • COMPLETE GASKET & SEAL KIT.
  • CRANKSHAFT MAIN BEARINGS
  • CONNECTING ROD LARGE & SMALL END BEARINGS.
  • CONNECTING ROD BOLTS
  • GASKET SEALING COMPOUNDS AND CRANKCASE SEALER.
  • TECHNICAL ASSISTANCE FROM THE MASTERTECH.

IMPORTANT!!
REMEMBER TO NOTE ANY OVERSIZES NEEDED IN THE "SPECIAL INSTRUCTIONS" BOX ON THE ADDRESS PAGE IN THE SHOPPING CART SO THAT THE CORRECT PISTONS ARE SENT TO YOU

MOST KITS ARE BEING FIGURED USING WSM PISTONS.
WISECO PISTONS AVAILABLE FOR MOST KITS AT HIGHER PRICE.

HOW TO ORDER

Look for the basic manufacturer and horsepower on the table below, click the appropriate box to go to that area. Then, just add the kit you need to the shopping cart.
BE SURE and submit THE MODEL and SERIAL NUMBER as well as the PISTON OVERSIZE information in the SPECIAL INSTRUCTIONS area of the order form, which is on the page of checkout where you supply shiping and billing addresses.

warning symbolNOTE!! I reiterate, you MUST PROVIDE THE MODEL NUMBER as well as any PISTON OVERSIZE when ordering.
I cannot send you the correct parts otherwise!

Many prices flucuate; we haven't time to go thru all of these and re-figure them daily.
Prices are a general guide only. Please contact us for current prices

PLEASE CONTACT US IF YOU HAVE ANY QUESTIONS.

OMC 2 CYLINDER
REMEMBER - - - ALL PRICES INCLUDE DOMESTIC SHIPPING!!

Please remember to enter your MODEL I.D. and OVERSIZE INFO  in the shopping cart !!

9.9/15, 1974-1983
2.188" standard bore
PISTONS available
STD., .020, .030, .040
$340.00
9.9/15, 1984-1992 PISTONS available
STD., +.010, .020, .030, .040
No center main bearing (discontinued)
$313.00
9.9/15, 1993-UP
(BORE SIZE INCREASED)
PISTONS available
STD., .010, +.020, .030 , .040
Center main discontinued.
Possibly we can find it if necessary.
$323.00
18 & 20 JET  1995-00
18, 20, 25, 30 HP  1981-UP
Evinrude Johnson 18-35 HP
Click Image
For Larger
3.00" Bore, 3/4" Wristpin
Crossflow

STD., +010, .020, .030, .040
$395.00 100-103-1x series
25, 35 HP 76-80
5/8 Wrist pin
(Kit converts to 3/4 Wrist pin)
some parts OEM only
(why it's priced higher)
$599.00
40-50 HP 1981-05
28 Jet 1995-98
35 Jet 1991-97
60 HP 1980-85
Evinrude Johnson 40-60 HP
Click Image
For Larger
3.187" Bore Looper

STD., +010, .020, .030, .040
$442.00 100-100-1x series
DON'T SEE WHAT YOU NEED? JUST ASK.
QUICK QUOTE FORM
QUICK SECURE ORDER FORM

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. Remember, all orders receive free technical support from the MasterTech!


OMC Three-Cylinder Kits
REMEMBER - - - ALL PRICES INCLUDE DOMESTIC SHIPPING!!

Please remember to enter your MODEL I.D. and OVERSIZE INFO  in the shopping cart !!

25 & 35 HP
3-CYLINDER
OEM / WISECO Parts Only
STD., +.030
$824.00
50 HP 1995-UP
60-70 HP 1986-UP
Evinrude Johnson 40-60 HP
Click Image For Larger
Standard Bore size 3.187"
Please Verify yours!

STD., +.010, .020, .030, .040
$590.00 100-120-1x series
65-75 HP 1972-75
Evinrude Johnson 60-75 HP thru 1988
Click Image For Larger
STD., +.010, .020, .030, .040 $618.00 100-104-1x series
60 HP 1986-88
65-75 HP 1976-88
Evinrude Johnson 60-75 HP thru 1988
Click Image For Larger
Standard Bore size 3.000"
Please Verify yours!

STD., +.010, .020, .030, .040
$604.50 100-104-1x series
OMC V4 Kits

Please remember to enter your MODEL I.D. and OVERSIZE INFO  in the shopping cart !!

REMEMBER - - - ALL PRICES INCLUDE DOMESTIC SHIPPING!!
OVERSEAS CUSTOMERS SHIPPING V4 KITS IS $110 SHIPPING BY PRIORITY MAIL

How to tell the difference between 90° and 60° motors?  Look HERE
85 HP Crossflow 1974-78, 3.375 bore +.020, +.030, +.040 ONLY,
No std. size available
No upper main available
$987.00
60 Degree Motors:
90 HP 1995-06
100 HP 1998-01
105 HP 1992-03
115 HP 1995-06
Evinrude Johnson V4 60 Degree
Click Image For Larger
STD., +.010, .020, .030, .040 $965.00 100-130-1x series
1973 115, 135 HP Crossflow, 3.500 bore No Pistons Available
Contact Us for other parts
--- ---
115 1974-78
140 HP Crossflow, 1974-77
STD., +.020, .030, .040
includes new bearing cap and cover bolt kits
$947.00
V4 Crossflow 1978-UP
Evinrude Johnson V4 Crossflow
Click Image For Larger
STD., +.010, .020, .030, .040
includes new bearing cap and cover bolt kits
$899.00 100-110-1x series
120-140 HP 90° Looper
3.500" Small bore, 1985-87
Evinrude Johnson V4 Looper Small Bore
Click Image For Larger
STD., +.010, .020, .030, .040
includes new bearing cap and cover bolt kits
$912.00 100-115-1x series
120-140 HP 90° Looper
3.685" Bore, 2.0L 1988-95
Evinrude Johnson V4 Looper Big Bore
Click Image For Larger
STD., +.010, .020, .030, .040 $912.00 100-135-1x series
90-115 HP 60° Looper CARBURETED
1993-UP
Evinrude Johnson V4 Looper CARB
Click Image
For Larger
STD., +.010, .020, .030, .040 $960.00 100-130-1x series
V4 60° Looper
FICHT FFI
Evinrude Johnson V4 Looper FICHT FFI
Click Image
For Larger
STD., +.010, .020, .030, .040 $999.00 100-133-1x series
DON'T SEE WHAT YOU NEED? JUST ASK.
QUICK QUOTE FORM
QUICK SECURE ORDER FORM

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. Remember, all orders receive free technical support from the MasterTech!


OMC CARBURETED V6, V8 KITS

Please remember to enter your MODEL I.D. and OVERSIZE INFO  in the shopping cart !!

REMEMBER - - - ALL PRICES INCLUDE DOMESTIC SHIPPING!!
OVERSEAS CUSTOMERS: SHIPPING V6 & V8 KITS IS $120 SHIPPING BY PRIORITY MAIL

How to tell the difference between 90° and 60° motors?  Look HERE
150-175 HP
60° Looper 1992-UP
Evinrude Johnson V6 Looper CARB
Click Image
For Larger
STD., +.010, .020, .030, .040 $1,360.00 100-130-2x series
150 HP 1978-91
175 HP 1977-83
185 HP 1984-85
200 HP 1976-83
235 HP 1978-79
Evinrude Johnson V6 Crossflow CARB
Click Image
For Larger
Crossflow, 150 CID. 3.500" bore
STD., +.010, .020, .030, .040
$1,240.00 100-110-3x series
175 HP 1986-90
235 HP 1980-85
Evinrude Johnson V6 175 & 235 BigBore X-flow
Click Image
For Larger
Crossflow 160 CID. 3.625" bore
STD., +.010, .020, .030, .040
$1,255.00 100-140-1x series
200-225 HP
90° Looper
Small bore 1985-87
Evinrude Johnson V6 200-225 SmallBore Loop 85-87
Click Image
For Larger
STD., +.010, .020, .030, .040 $1250.00 100-115-2x series
200-225 HP
90° Looper
Big bore 1988-92
Evinrude Johnson V6 Looper Big Bore 88-92
Click Image
For Larger
STD., +.010, .020, .030, .040 $1,287.00 100-135-2x series
200-225 HP
90° Looper
3 Litre 1993-2004
Evinrude Johnson V6 Looper 1993 - UP
Click Image
For Larger
STD., +.010, .020, .030, .040 $1,390.00 100-125-1x series
300 HP V8 1988-95 STD., +.010, .020, .030 $1,633.00
DON'T SEE WHAT YOU NEED? JUST ASK.
QUICK QUOTE FORM
QUICK SECURE ORDER FORM

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. Remember, all orders receive free technical support from the MasterTech!


OMC FICHT & E-TEC KITS

Please remember to enter your MODEL I.D. and OVERSIZE INFO  in the shopping cart !!

REMEMBER - - - ALL PRICES INCLUDE DOMESTIC SHIPPING!!
More Listings Soon. For Those Not Listed yet CONTACT US
3-Cylinder E-TEC® STD., + .020, .030, .040 $768.00 100-126-2x series
V4 E-TEC®
Evinrude V4 E-TEC
Click Image
For Larger
STD., + .010, .020, .030, .040 $1,335.00 100-131-1x series
150 & 175
FICHT® & FFI
60° Looper 1998-UP
Evinrude Johnson V6 Looper FICHT FFI
Click Image
For Larger
STD., +.010, .020, .030, .040 $1,435.00 100-133-2x series
150, 175 E-TEC®
2007-2012
Evinrude V6 E-TEC
Click Image
For Larger
STD., + .010, .020, .030, .040 $1,440.00 100-131-2x series
200-225 HP 1988-92
90° Looper
3 Litre  3.685" bore
STD., + .010, .020, .030, .040 $1,295.00 100-135-2x series
200-225 HP 1993-UP
90° Looper
3 Litre  3.685" bore
STD., + .010, .020, .030, .040 $1,390.00 100-125-1x series
200 HP Ficht
225 HP FH225, FLH225
2000-2005
250 HP 2000-2005
90° Looper FICHT® & DI
3.3 Litre  3.854" bore
STD., + .010, .020, .030, .040 $1,390.00 100-134-1x series
225-250 HP E-TEC®
3.3 Litre  3.854" bore
Evinrude V6 E-TEC 3.3L
Click Image
For Larger
STD., + .010, .020, .030, .040 $1,410.00 100-136-1x series
DON'T SEE WHAT YOU NEED? JUST ASK.
QUICK QUOTE FORM
QUICK SECURE ORDER FORM

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. Remember, all orders receive free technical support from the MasterTech!

 
 

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.