Mastertech logo  Used parts link

Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!


A Fun Old Porcelain Sign and Ancient Tools

Sign Reads "Wanted: Good Woman Must Be Able To Clean, Cook, Sew,  Dig Worms, and Clean Fish.  Must Have Boat and Motor. Please Send Picture of Boat and Motor."

 

Meet the MasterTech!
(click picture)

Bill the Master Tech

 

If your Mfgr. says:

That motor's 7 years old!!
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Part's at central warehouse, you'll get it next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

 

 

Baloney!!

Contact
the Mastertech!

 

 


,

 
PayPal
Credit Cards
In Your Cart:
Items
 
 
 
 
  

POWERHEAD REBUILD KITS

PARTS PACKAGE KITS FOR REBUILDING POWERHEADS

These kits contain all the parts you will commonly need to complete the overhaul of your outboard's powerhead. If the determination has been made that you need to rebuild, we have the necessary items! And the nice part is, you will pay less for the kit than you would for the individual parts, as you save us time in ordering. So you will have all the goodies you need to do the job right.
For motors not listed, contact us directly for the specific application. It is likely we can provide the components you need. NISSAN TOHATSU Rebuild kits include all of the following items, as required, unless noted:

  • PISTONS/ RINGS/ WRISTPINS/ RETAINERS
  • COMPLETE GASKET & SEAL KIT
  • CRANKSHAFT UPPER AND LOWER MAIN BEARINGS
  • WRIST PIN BEARINGS
  • THERMOSTAT (if present) AND IMPELLER
  • THREADLOCKER AND CRANKCASE SEALER
  • EXPLODED VIEWS, ASSEMBLY AND TORQUE SPECS
  • TECHNICAL ASSISTANCE FROM THE MASTERTECH
  NOTE!!   Most Tohatsu-Nissan crankshafts are either 1-piece or pressed-together units.
  Center Main Bearings and Crank-end Rod Bearings are NOT included in these kits.
  If you need them, you will have to find a machine shop that is equipped to press these cranks apart to replace those bearings.
  On some motors, these bearings are not sold, so a new crank is the only option.
   Contact Us if you need these so we can check availability of individual bearings.


HOW TO ORDER

Just add the kit you need to the shopping cart. You MUST PROVIDE the YEAR, MODEL and SERIAL NUMBER when ordering.
Also, in the Comment section, please note
STANDARD or .5mm OVERSIZE.
We cannot send you the correct parts otherwise!

PRICES are up-to-date as of 2/1/2024
Please contact us via the Quote Form if you have any questions.


NISSAN-TOHATSU COMPLETE KITS
MOTOR MODEL SIZES
(0.5mm is just a hair under 0.020" oversize)
PRICE ORDER HERE
  2.5A, A2  &  3.5A, A2
  NO GEARSHIFT
  STD., +0.5mm $189.00
 3.5B
  (3.5 HP WITH SHIFT)
  STD., +0.5mm $195.00
 5B   STD., +0.5mm $247.00
F4A2, F5A2, F6A2
  4-stroke
  STD., +0.5mm $233.00
F6B, F6C
  4-stroke
  STD., +0.5mm $253.00
8B, 9.8B   STD., +0.5mm $336.00
9.9B2   STD., +0.5mm $545.00
9.9C, 15C   STD., +0.5mm $545.00
 9.9D2, 15D2   STD., +0.5mm $595.00
18C2   STD, .5mm
    with all bearings
$690.00
18D   STD., +0.5mm $555.00
18E2   STD., +0.5mm $575.00
25C2, C3
   30A3, A4
  STD., +0.5mm $595.00
40C
   2 CYLINDER
  STD., +0.5mm $775.00
45A2, 50C, 60A, 70A2
  2 CYLINDER
  NOTHING AVAILABLE
  ANY MORE
~~~ ~~~~
 40D, 40D2
  50D, 50D2
  3 CYLINDER
  STD., +0.5MM $1075.00
60B, 60C, 70B, 70C
  UPPER & LOWER MAINS ONLY
  This has a press together crank
   STANDARD SIZE ONLY KIT
     No aftermarket available
$1275.00
60B, 60C, 70B, 70C
  UPPER & LOWER MAINS ONLY
  This has a press together crank
   .5mm (.020") OVERSIZE KIT
     (no price misprint, Tohatsu really does charge $50 more per oversize piston on these)
     
NO aftermarket available
$1295.00
90A
  UPPER & LOWER MAINS ONLY
  This has a press together crank
WISECO PISTONS ONLY+
  .020, .030 Oversizes
$1075.00
115A, 120A, 140A
  UPPER & LOWER MAINS ONLY
  This has a press together crank
  STD. ( +.5MM AVAILABLE AT EXTRA COST) $1575.00
MD115A TLDI
  UPPER & LOWER MAINS ONLY
  This has a press together crank
  STD. ( +.5MM AVAILABLE AT EXTRA COST) $1875.00
 
 

We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added. Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case. All orders normally ship via USPS. Remember, all orders receive free technical support from the MasterTech!

 
 

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.