MERCURY OUTBOARD and MERCRUISER Controls, Fuel tanks, Fuel Lines and related, Anodes, Alternator Conversion 3.7L -- MASTERTECH MARINE

Wondering
"Where-'n-'Ell"
to get great parts for your outboard?

Right Here!

A Fun Old Porcelain Sign and Ancient Tools

Sign Reads "Wanted: Good Woman Must Be Able To Clean, Cook, Sew, Dig Worms, and Clean Fish. Must Have Boat and Motor. Please Send Picture of Boat and Motor.

Meet the MasterTech!
(click picture)

If your supplier says:

That motor's 7 years old.
Part is no longer available.
We lose $$ on service!
EPA made me do it!
Parts at central warehouse, you'll get them next month.
We don't make parts for those.
We only do warranty work.
Our techs only fix late models.
No clue what's wrong! So we'll work time & material.

Baloney!!

Contact
the Mastertech!

			In Your Cart:

FAST MOVING PARTS

MERCURY/MARINER/MERCRUISER/FORCE

REMOTE CONTROLS,

FUEL ACCESSORIES

MISCELLANEOUS
APPLICATION / DESCRIPTION		PART #	PRICE	SELECT
ALTERNATOR KIT FOR 3.7L MERCRUISER. REPLACES OUTBOARD-STYLE ORIGINAL ALTERNATOR SYSTEM WITH A STANDARD SYSTEM		18-5953-1	$854.00
STERN DRIVE & OUTBOARD KILL SWITCH KIT	Click Image For Larger	19674A05	$54.25
INBOARD & STERN DRIVE DASH MOUNT IGNITION SWITCH KIT WITH HARNESS		54212A7	$66.75
FORCE OUTBOARD KEYSWITCH. DASHMOUNT, PUSH TO CHOKE. UP TO 1/2" THICK PANEL. CAN BE USED WITH OTHER OUTBOARD BRANDS		F5H268	$49.00
FORCE OUTBOARD KEYSWITCH. DASHMOUNT, PUSH TO CHOKE. UP TO 1-7/16 " THICK PANEL. CAN BE USED WITH OTHER OUTBOARD BRANDS		F5H078	$49.50
MERCURY IGNITION SWITCH, FITS MANY CONTROL BOXES BARE WIRE ENDS Off-Run-Start/Push to choke	CLICK IMAGE FOR LARGER	MP52000	$46.00
MERCURY IGNITION SWITCH, FITS MANY CONTROL BOXES BULLET CONNECTOR ENDS	CLICK IMAGE FOR LARGER	MP51090	$53.75
BLOW-START FUEL SIPHON BLOW INTO SHORT HOSE TO START SIPHON ACTION; TRANSFERS FUEL FROM PORTABLE TANK TO BOAT TANK WITHOUT THE "GAS IN THE MOUTH" PROBLEM! GREAT FOR CARS, LAWN & GARDEN EQUIPMENT TOO!		91-827497A1	$16.00
ANODE -- FITS MOST MOST OUTBOARDS and MERCRUISER DRIVES EXCEPT BRAVO		31640Q4	$13.00
ANODE (FLAT) -- FITS MOST ALPHA GEN II, BRAVO DRIVES & OUTBOARDS		76214Q5	$19.00
ANODE (OFFSET) -- FITS MANY SMALL OUTBOARDS WITH OFFSET FIN. NOTE THE DIFFERENCE BETWEEN THIS ONE AND THE ONE BELOW!		98432Q6	$13.00
ANODE (OFFSET) -- FITS MOST DRIVES & OUTBOARDS WITH HIGH-RAKE PROPS REQUIRING EXTRA CLEARANCE		822777Q1	$17.00
ANODE -- FITS MOST JAPANESE MARINER OUTBOARDS 40-60 HP 2-CYLINDER		83859T	$37.00

FUEL SYSTEM ACCESSORIES
APPLICATION / DESCRIPTION		PART #	PRICE	SELECT
FUEL LINE w/PRIMER 8' WITH QUICK DISCONNECT FITTINGS BOTH ENDS		18-8016	$42.00
FUEL LINE w/PRIMER 8' WITH QUICK DISCONNECT FITTING MOTOR END, BAYONET FITTING TANK END		DISCONTINUED	--------	NO LONGER AVAILABLE
FUEL LINE w/PRIMER 8' WITH QUICK DISCONNECT FITTING MOTOR END, THREADED FITTING TANK END		18-8024	$35.00
FUEL LINE w/PRIMER 8' WITH "AIR HOSE STYLE" DISCONNECT FITTING MOTOR END, 1/4 THREADED FITTING TANK END		DISCONTINUED	--------	NO LONGER AVAILABLE
PRIMER BULB for 1/4" I.D. HOSE		89396Q01	$12.00
PRIMER BULB for 5/16 " I.D. HOSE		13330Q07	$12.50
OIL PUMP BLOCK-OFF KIT INLINE 3 & 4 CYL FOR PRE-MIXING GAS & OIL IN FUEL TANK. COVERS HOLE IN BLOCK WHEN OIL PUMP IS REMOVED	Click Image for Larger Size	420212	$12.00
MERCURY ORIGINAL EQUIPMENT WATER SEPARATING FUEL FILTER KIT (MINUS FITTINGS -- SOLD SEPARATELY AS NEEDED)		802893A4	$43.00
MERCURY ORIGINAL EQUIPMENT WATER SEPARATING FUEL FILTER REPLACEMENT SPIN-ON ELEMENT		35-802893Q01	$10.00
MERCURY ORIGINAL EQUIPMENT 6.6 GAL. FUEL TANK RED PLASTIC, BUILT-IN FUEL GAUGE, 1/4" TREADED FITTING HOUSING		859063A1	$65.00
MERCURY ORIGINAL 3.2 GAL. FUEL TANK RED PLASTIC, BUILT-IN FUEL GAUGE, 1/4" TREADED FITTING HOUSING		859061A1	No Longer Made 2011	NO LONGER AVAILABLE

DON'T SEE WHAT YOU NEED? JUST ASK. QUICK QUOTE FORM
QUICK SECURE ORDER FORM

Now that you have found what you need, please order it using the shopping cart above, the secure quick order form, or call in your order .
We pay the freight out in USA on all orders over $100.00. Orders less than this amount will have a shipping and handling charge of $8.75 added.
Some bulky and heavy items will incur additional charges. You will be notified beforehand if this is the case.
Remember, all orders receive free technical support from the MasterTech!

REMOTE CONTROLS and HARNESSES FREE SHIPPING Items in This Section
APPLICATION / DESCRIPTION		PART #	PRICE	SELECT
ORIGINAL EQUIPMENT SURFACE SIDE MOUNT REMOTE CONTROL TRIM & TILT, TACH HARNESS, IGNITION SWITCH, KILL SWITCH, WARNING HORN PORT OR STARBOARD MOUNT FITS CURRENT OUTBOARDS and 1993 - UP FORCE 40 HP & LARGER NOT FOR USE WITH COUNTER-ROTATING ENGINES!		881170A15 15' HARNESS (NOT AVAILABLE WITHOUT TRIM/TILT SWITCH)	$305.00
ORIGINAL EQUIPMENT COMMANDER CONSOLE MOUNT REMOTE CONTROL WITH TRIM & TILT. REQUIRES SEPARATE IGNITION SWITCH. FITS INBOARDS & OUTBOARDS and 1993 - UP FORCE 40 HP & LARGER		88688A25	$325.00
ORIGINAL EQUIPMENT COMMANDER CONSOLE MOUNT REMOTE CONTROL WITHOUT TRIM & TILT. REQUIRES SEPARATE IGNITION SWITCH. FITS INBOARDS & OUTBOARDS and 1993 - UP FORCE 40 HP & LARGER		88688A27	$317.00
Harness, Engine to Remote Control 1979-UP 8-Pin plug, 20' Long Add Appropriate Wire Connectors To Control End Wires To Match Control Box	Click Picture For Larger Version	474-9560	$271.00
Harness, Engine to Remote Control THRU 1978 7-Pin plug, 20' Long 6' Battery Cables Add Appropriate Wire Connectors To Control End Wires To Match Control Box	Click Picture For Larger Version	474-9550	$271.00
Universal Main Engine Harness 7-Pin plug, many older motors with this pattern: Plug in the side of motor cover	Click Picture For Larger Version	414-3369	$168.00
Universal Main Engine Harness 7-Pin plug, many older motors with this pattern: Plug is in the side of motor cover	Click Picture For Larger Version	414-2770	$170.00
Universal Main Engine Harness 7-Pin plug, many older motors with this pattern: Plug in side of motor cover	Click Picture For Larger Version	414-5532	$174.00

DON'T SEE WHAT YOU NEED? JUST ASK. QUICK QUOTE FORM
QUICK SECURE ORDER FORM

Please review our Warranty, Returns & Refunds policies before you place an order.

DISCLAIMER

The information provided on these pages is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published on this web site may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this site at any time. Parts ordered from this website may or may not be in dealer stock at the time of order. Thank you for reading.